In-Bin Drying Systems

Shivvers

The Circu-Lator II tapered sweep auger removes an even layer of dried grain from the perforated floor to the center vertical where it is lifted to a transfer auger and on to your storage bins. The Shivvers Circu-Lator II Performance System consists of a circulater II (the augering equipment inside the bin;) COMPUDRY™ Command Center; drying floor and supports; continuous flow transfer auger; a BLUEFLAME™ dryer and a grain spreader. 

COMPUDRY™ Command Center with Printer

The COMPUDRY™ Command Center constantly monitors conditions such as grain moisture, grain temperature, and plenum temperature, while also controlling all components of the system. Designed with the operator in mind, it is easy to use with fingertip control of your entire drying process.  Make your initial settings to the Command Center, concentrate on harvesting your crop, and keep grain in the drying tank … while the Command Center does the rest.

DMC Stir-Ator

Only DMC’s Stir-Ator single, double or triple auger machines give you the most thorough, systematic time tested stirring pattern you can buy.

Choose a DMC Stir-Ator with one, two or three augers to fit 18 to 48 foot bins. Whether purchasing a new bin or updating present storage to drying, a Stir-Ator can cut drying time by 50% in a low temperature bin. A Stir-Ator can also help store grain and be used as a management tool for grain conditioning.

Stormor Ezee Dry Bins

Common Sense Design, simplicity of operation, and maintenance of quality grain is what the Ezee Dry is known for. This is just what you will find in this overhead drying system and full capacity storage bin.

Features:

High Volume Airflow combines with low static pressure, low temperature drying and low horsepower requirements to efficiently and safely dry grain.

Few Moving parts means low maintenance. Leveling rings let gravity do all the work; no interior augers are needed.

Dump Spouts dump the grain from the drying chamber to the cooling floor below. Again gravity does all the work.

Cooling Fan recirculates hot air from cooling grain back up to the drying chamber to help dry the next batch.

Cooling Floor consists of perforated steel planks supported by steel floor support legs, designed for uniform air circulation.